Description
We have developed this V2 shifter as an evolution of our V1, so the differences are minimal but well placed. The general feedback was that everyone loved the feel of the V1 but it was on the loud side. With this in mind we tested a number of solutions and came up with this V2. The new PSL V2 feels exactly the same as the last V1 shifter but will just be quieter, it is by no means silent but there is no annoying ring or resonance that came with the V1 it is more of a solid thump and at a considerably lower level than the V1.
We also worked on reducing the secondary clunk which was the claw hitting back into position, which is what made it seem even louder as there was 2 distinct noises. We have used a very hard wearing silicone rubber as well to ensure the life is still very good from the shifter and it has been tested extensively before release.
Noise Level
We have tested the noise on the V2 and it comes in at 75Db measured next to the mechanism which is exactly the same as our H pattern. There is variation on what it it mounted to though, with our other sequential shifter and H pattern the body is made from solid aluminium which absorbs most of the vibration but with the PSL having thinner steel plates some vibration is transferred to the mounting surface. This is one reason why we think there is a difference on opinions on noise, if noise is of concern we suggest mounting the shifter on something similar to this; http://www.soundproofing-direct.co.uk/miscellaneous/dedsheet-vibration-damping-sheet
Material
One big differentiator of our gear shifters to the current market is the material. In a market where plastic products have dominated, people often think ‘metal’ is considered the hardest or toughest material that could be used. For us just any old metal is not enough. We use the highest quality steel 835M19 often found in aerospace applications and go one step further to apply heat treatment to case harden the material. Once the material has been hardened only the most specialised carbide/diamond tools can be used to perforate it. We do this for ultimate durability on all the critical components, creating a shifter designed to last a lifetime.. We are using the same electronics which is a Leo Bodnar board with magnetic switches to sense the gear shifts for the ultimate reliability.
Connectivity
The shifter is supplied as a stand alone USB game controller device and will be compatible with all major racing games on PC.
Customisation
If you require custom branding please contact us on info@pro-sim.co.uk
Why we use Quaife
RT Quaife Engineering Ltd uses motorsport-inspired design and precision engineering capabilities to deliver a large range of high performance drivetrain products destined for vehicle manufacturers, motorsport competitors and the retail aftermarket.
Quaife was founded in 1965. Headquartered near Sevenoaks in the South East of England, the firm employs over 80 skilled people at two high technology manufacturing facilities, which produce a globally recognised brand of products that are sold through 70 distributors in 26 countries.
Video Review:
Distributors:
To view, try out or purchase this shifter at a location closer to you please visit our authorised distributors below:
Australia:
USA:
Canada:
Europe:
